about us

Remove Engine Cover
First, you need to remove the engine cover. The mechanic will have to remove the plastic engine cover to access the valve cover. Next, they will remove the necessary components. On most four-cylinder engines, the valve cover can usually be reached after any electrical parts and emission control tubing is removed out of the way, along with any accelerator linkages that might be in the way of the valve cover.

1. The oil seal consists of a metal ring as the inner skeleton which provides the structural stability to the oil seal.

2. The outer skin is made of nitrile rubber and various other materials which are used based on the requirement.

3. The spring on the lip of the oil seal tends to provide support to the lip and prevents the lubricant from leaking outside and also prevents the entry of contaminants from outside.

1. The oil seal consists of a metal ring as the inner skeleton which provides the structural stability to the oil seal.

2. The outer skin is made of nitrile rubber and various other materials which are used based on the requirement.

3. The spring on the lip of the oil seal tends to provide support to the lip and prevents the lubricant from leaking outside and also prevents the entry of contaminants from outside.

The head gasket is a vital component within the combustible engine. The head gasket ensures the pressure created from the spark plug’s ignition of fuel vapors remain within the combustion chamber. The combustion chamber contains the pistons and needs a high amount of pressure to ensure the pistons continue to fire appropriately. Additionally, oil and coolant have equally important jobs but, in order to perform their tasks efficiently, they cannot mix. The head gasket keeps the chambers separated to ensure there is no cross-contamination of fluids.

Dear friend,
On the occasion of the Holy Month of Ramadan.May you all be loved, grateful, safe and most importantly healthy.May the crescent-shaped moon brighten your path toward enlightenment.

Oil seals are rubber seals which are widely used nowadays. How many processes do you need to master to make oil seals? Next, Xingtai Xinchi Rubber and Plastic Products Co.,Ltd. will give you a detailed introduction.

Blending of oil seal (sealing ring) production process: In foreign countries, this oil seal production process has been widely used to manufacture rubber mixtures by internal mixer. Automatic weighing mixing, automatic feeding, automatic welding mixing and dispensing, high production efficiency and good quality of resin.

Oil seal is our customary name for lubricating oil seals. It is a mechanical element used to seal grease. It can isolate the parts that need to be lubricated in the transmission parts from the output parts, so as not to allow the oil to leak.

Oil seals are divided into static seals and dynamic seals, and their main function is to seal and lubricate. When the oil seal is working normally, there will be a layer of oil slick between the oil seal lip and the shaft. This layer of oil slick not only has a sealing effect, but also has a lubricating effect.

O-rings can be used in a variety of applications because they are made from a variety of materials. O-rings are usually made of rubber, or more specifically a polymer/elastomer. These polymers are usually cured by vulcanization, resulting in strong, durable and more elastic rubber materials.

In the use of O-rings, specific working conditions and conditions of use need to be considered. Temperature and pressure will have effects and losses on the O-ring seal. Therefore, the following 5 points need to be considered in the use of O-ring rubber seals:

1. Working medium and working conditions;

2. The compatibility of the product with the working medium, and then consider the pressure, temperature, continuous working time, operating cycle and other conditions at the seal, and the temperature rise caused by friction heat also needs to be considered in rotating occasions;

As one of the effective conditions for sealing equipment, O-rings are also very important for their preservation. Newly purchased seals should be as isolated as possible from the external environment to prevent corrosion or wear. During the installation process, attention should also be paid to the stability of these basic conditions to prevent foreign matter from entering into the instability of the sealed environment. When storing and installing O-rings, the following requirements should be observed to prevent damage to the proper operation and quality of the O-rings.